Your Local Electrician In Dallas, GA

Complete new wiring from the ground up. Includes outlet/switch installation, dedicated circuits for appliances (oven, dryer, AC), subpanel installation, and rough-in wiring for additions. We serve new builds and renovations across Dallas and surrounding areas.

Examples: Adding a 240V outlet for a workshop, wiring a basement finish, installing outdoor outlets for holiday lights.

Avg pricing: $150–$500 per circuit | $2,000–$8,000+ whole home

Brands: Legrand, Leviton, Hubbell, Eaton wiring devices

Fast, safe fixes for failing components. From dead outlets and shorted switches to buzzing breakers and melted wiring. We diagnose hidden issues using thermal imaging and multimeter testing — serving homes across Dallas.

Examples: Replacing a burned outlet, repairing light fixtures, fixing exposed wires, correcting reverse polarity.

Avg pricing: $125–$400 (diagnostic + repair)

Brands: Genuine replacements using Siemens, Square D, Cooper, Lutron

24/7 response — we answer nights, weekends, holidays. Power outages, sparking panels, burning smells, downed service lines, or complete blackouts. Our rapid-response team covers all Dallas neighborhoods.

Examples: Main breaker failure after storm, arcing in attic wiring, live wire exposed, no power to half the home.

Emergency fee: $150–$300 trip + time & materials (always transparent)

Promise: Arrival within 90 minutes for active hazards

Replace outdated fuse boxes or overloaded 100A panels. Upgrade to 200A or 400A service to support EV chargers, heat pumps, home additions, and modern appliances. We handle load calculations and permit pulling for Dallas properties.

Examples: Federal Pacific / Zinsco panel replacement, adding space for new circuits, relocating panel for code compliance.

Avg pricing: 100A→200A: $1,800–$3,200 | 200A→400A: $3,500–$6,000

Brands: Square D QO, Siemens, Eaton BR (with whole-home surge ready)

Comprehensive safety and code compliance checks. Ideal before buying a home, after storm damage, or every 5–10 years. We inspect panels, wiring, grounding, AFCI/GFCI protection, and hidden hazards. Detailed report with photos and repair recommendations.

Examples: Pre-purchase inspection for Dallas real estate, landlord safety check, post-renovation verification.

Avg pricing: $249–$499 depending on property size

Includes: Thermal scan of panel and high-load connections

Level 2 home charging — faster, safer, future-proof. We install 48A / 60A circuits, hardwired or NEMA 14-50 outlets. Load management available if your panel is near capacity. Serving Tesla, Ford, Chevy, BMW, and all J1772 vehicles.

Examples: Tesla Wall Connector, ChargePoint Home Flex, Grizzl-E Classic, Emporia EV.

Avg pricing: $650–$1,800 (includes permit, breaker, wiring, labor)

Brands installed: Tesla, ChargePoint, Grizzl-E, JuiceBox, Lectron, Autel

Retail, office, restaurant, and warehouse electrical. Three-phase power, LED retrofits, emergency lighting, code-mandated egress lighting, and panel upgrades for commercial loads. We work with property managers across Dallas.

Examples: Signage lighting, parking lot pole lights, breaker replacement for kitchen equipment, data rough-in.

Avg pricing: $125–$200/hr or project bid (free quote)

Brands: Lithonia lighting, GE industrial panels, Legrand wiremold

Heavy-duty machinery, motor controls, and high-voltage systems. We support manufacturers, fabrication shops, and industrial warehouses. Services include 480V work, VFD installation, conduit bending, and preventative maintenance.

Examples: CNC machine hookup, compressor wiring, conveyor system power, motor control center (MCC) repairs.

Avg pricing: Custom quote based on scope (time & materials or fixed bid)

Certifications: NFPA 70E arc flash safety, lockout/tagout compliant

Full rough-in and trim-out for custom homes and developments. We coordinate with GCs, pull permits, and ensure all wiring meets NEC and local amendments. From trenching for underground service to final trim of switches and fixtures.

Examples: Spec homes, custom builds, ADU garage apartments in Dallas.

Avg pricing: $3.50–$8.00 per sq. ft. depending on complexity

Brands: Southwire cable, Arlington boxes, Lutron, Legrand

Automatic standby generators — power during outages. We install Generac, Kohler, and Champion units with automatic transfer switches, gas line hookup (subcontracted), and load testing. Keeps your HVAC, well pump, fridge, and lights running.

Examples: 22kW Generac Guardian, 14kW Kohler, 26kW Champion for large homes.

Avg pricing: $4,500–$10,000 (includes unit, ATS, installation, permit)

Brands: Generac, Kohler, Champion, Westinghouse

Complete replacement, upgrade, and new installation for all your home's control points and lighting. We handle everything from basic outlet swaps to complex 3-way switch configurations and decorative fixture mounting.

Outlets: Standard 15A/20A receptacles, GFCI protection (kitchens, baths, outdoors), AFCI breakers/combo outlets, USB charging outlets, tamper-resistant (TR) for child safety, and 240V outlets for appliances.

Switches: Single-pole, 3-way, 4-way, dimmers (LED/CFL compatible), motion sensor switches, occupancy/vacancy sensors, smart Wi-Fi switches, timer switches.

Fixtures: Chandeliers, pendant lights, flush-mount ceiling lights, vanity bars, track lighting, under-cabinet lighting, bath exhaust fans with lights, and outdoor wall sconces.

Avg pricing: Outlets: $125–$250 each | Switches: $100–$200 each | Fixtures: $150–$400+ (labor only)

Brands we carry/install: Lutron, Leviton, Legrand, Eaton, Hubbell, Kichler, Halo, Progress Lighting, and Hunter.

Whole-home Type 2 surge protection at the panel. Stops voltage spikes from lightning, grid switching, or appliance cycling from damaging your electronics, HVAC, and smart devices. Optional point-of-use strips for sensitive equipment.

Examples: Leviton 51120, Siemens FS140, Eaton CHSPT2ULTRA — 40kA to 80kA ratings.

Avg pricing: $250–$650 installed (panel + permit)

Warranty: Often includes connected equipment warranty (brand dependent)

Safe, wobble-free fan mounting. We replace old light fixtures or install new fans with proper ceiling-rated boxes and bracing. Includes balanced blades, remote or wall control setup, and correct downrod length for vaulted ceilings.

Examples: 52" fans for living rooms, damp-rated fans for covered porches, small fans for bedrooms.

Avg pricing: $125–$250 per fan (existing box) | $200–$400 (new box/bracing)

Brands: Hunter, Harbor Breeze, Minka Aire, Casablanca

Preventative plans to avoid failures and fire hazards. Includes annual panel torque check, GFCI testing, thermal scan of breakers, and smoke detector battery/age check. Ideal for rental properties, HOAs, and homeowners wanting peace of mind.

Examples: Annual safety check, tightening loose connections, labeling panel directories.

Avg pricing: $199–$399 per visit | Multi-year plans available

Includes: Detailed report with photos and risk ratings

New runs, rewiring old homes, and circuit expansions. We replace knob-and-tube, aluminum, or damaged NM cable. Also run dedicated circuits for appliances, home offices, workshops, and home theaters.

Examples: Rewiring a 1950s Dallas home, adding a 20A circuit for a garage door opener and outlets.

Avg pricing: $250–$800 per circuit | Whole home rewire: $8,000–$15,000

Materials: Southwire Romex, MC cable, THHN in conduit per NEC

Diagnose intermittent problems, tripping breakers, and dead circuits. We use systematic methods (voltage drop tests, insulation resistance, thermal imaging) to find hidden faults that others miss.

Examples: Lights dimming when AC kicks on, half the kitchen outlets dead, breakers tripping randomly.

Avg pricing: $150 diagnostic fee (applied to repair if approved)

Tools: Fluke meters, FLIR thermal camera, Ideal circuit tracers

Recessed, chandeliers, track, under-cabinet, and statement fixtures. We handle precise placement, dimmer integration, and smart controls. Transform living rooms, kitchens, bathrooms, and home offices across Dallas.

Examples: 6" wafer LED retrofits, pendant lights over island, low-voltage tape lighting in cabinets.

Avg pricing: $150–$400 per fixture (labor) | $40–$200 per recessed can

Brands: Halo, Juno, Kichler, Tech Lighting, Lutron dimmers

Landscape, security, pathway, and accent lighting. We design low-voltage and line-voltage systems for curb appeal, safety, and functionality. Includes motion sensors, dusk-to-dawn photocells, and timer controls.

Examples: Uplighting trees, step lights on retaining walls, floodlights for driveway, patio string light hookup.

Avg pricing: $500–$1,800 for landscape system | $200–$500 per security floodlight

Brands: FX Luminaire, Kichler, Hinkley, RAB, Volt Lighting

Hardwired cameras, motion sensors, and alarm panel integration. More reliable than wireless. We install PoE cameras, door/window sensors, and connect to existing security panels or new Qolsys / Honeywell systems.

Examples: 4-camera Lorex system, Ring hardwired floodlight cam, full perimeter sensor wiring.

Avg pricing: $200–$500 per camera (installed) | $400–$1,200 full system

Brands: Lorex, Reolink, Hikvision, Ring Pro, Honeywell, DSC

Smart switches, thermostats, blinds, and whole-home hubs. We install and configure Lutron Caséta, Control4, Home Assistant, or consumer platforms like Kasa and Philips Hue. Centralize control of lighting, HVAC, and scenes from your phone or voice.

Examples: Smart dimmers in every room, schedule-based exterior lights, geo-fencing for garage doors.

Avg pricing: $150–$300 per smart switch | $500–$3,000 full home system

Brands: Lutron, Leviton Decora Smart, Control4, Hubitat, Philips Hue